Research Article

UTILIZATION OF SAHEL GRANITE DUST FROM GUDUM HAUSAWA IN BAUCHI STATE AS A GLASS FORMER IN THE FORMULATION OF STONEWARE GLAZES

Helga Mathias1*, Kator Jeff Jomboh1, Hadi Ibrahim Bello2
1 Department of Industrial Design, University of Maiduguri, Maiduguri, Borno. Nigeria
2 Department of Glass and Silicate Technology, Ahmadu Bello University, Zaria, Kaduna.
* Corresponding author: jefferyjom@yahoo.com
Published: Jun, 2026
DOI: 10.67203/ndr.2026.m1gvg8w3
Pages: 1-22

Abstract

This study investigates the suitability of Gudum Hausawa Sahel granite dust, a quarrying by-product from Bauchi, as a substitute for commercial silica in stoneware glaze formulation. The chemical and mineralogical properties of the granite dust were analysed using X-ray Fluorescence (XRF) and X-ray Diffraction (XRD) respectively. XRF results revealed high silica content (59.20% SiO₂) and substantial alumina (20.30% Al₂O₃), while XRD analysis indicated that the material is predominantly composed of quartz (~69wt.%) with significant feldspar phases (~28 wt.%), providing inherent fluxing oxides. These characteristics confirm that granite dust can function as both a glass former and a source of intrinsic fluxing agents. Glaze formulations were developed using the triaxial blend method, incorporating granite dust at varying proportions (0-40%) and compared with conventional silica-based control glazes. The glazes were applied to bisque-fired stoneware tiles and fired in an electric kiln under oxidizing conditions at temperatures between 1200 °C and 1250 °C. Post-firing evaluation showed that optimal compositions containing 20-40% granite dust exhibited good melting behaviour, producing smooth, glossy, and well-vitrified surfaces comparable in fusion, adhesion, and aesthetic quality to conventional glazes. The presence of iron oxide contributed to natural brown to dark-brown colouration without the need for additional colorants. The results demonstrate that granite dust is a technically viable and sustainable alternative to commercial silica in stoneware glaze production. Its utilization offers economic advantages through cost reduction and supports environmental sustainability by promoting waste valorization and reducing reliance on imported raw materials. This study highlights the potential of granite dust for industrial application in ceramic glaze formulation.

Keywords

Granite dust; Stoneware glaze; Silica; Sustainable production; Ceramic glaze formulation

References

  1. Abiola, O. (2023). Appraisal of Nigeria’s Ceramic Tile Production. Journal of Engineering Science and Technology Management (JES-TM), 3(2), 50–59. [https://doi.org/10.31004/jestm.v3i2.50](https://doi.org/10.31004/jestm.v3i2.50)
  2. Ajadi, M., Lawal, S. A., & Babalola, S. A. (2023). Physicochemical Characterization of Cullet to Glaze for Environmental Sustainability and Entrepreneurial Development. International Journal of Environmental Sciences, 6(3), 1–12. [https://doi.org/10.47604/ijes.2113](https://www.google.com/search?q=https://doi.org/10.47604/ijes.2113)
  3. Alkali, C. V. (2014). Exploration of the Potentials of Granite Sawing Waste in the Development of Ceramic Bodies (Unpublished doctoral thesis). Ahmadu Bello University, Zaria, Kaduna, Nigeria.
  4. Alves, C. L., Skorych, V., de Noni, A., Hotza, D., González, S. Y. G., & Heinrich, S. (2024). Optimizing raw material composition to increase sustainability in porcelain tile production: A simulation-based approach. Journal of the American Ceramic Society, 107(4), 2110–2127. [https://doi.org/10.1111/jace.19581](https://www.google.com/search?q=https://doi.org/10.1111/jace.19581)
  5. Amulya, G., Moghal, A. A. B., & Almajed, A. (2021). A state-of-the-art review on suitability of granite dust as a sustainable additive for geotechnical applications. Crystals, 11(12), 1526. [https://doi.org/10.3390/cryst11121526](https://www.google.com/search?q=https://doi.org/10.3390/cryst11121526)
  6. Andreola, F., Barbieri, L., Corradi, A., Lancellotti, I., Falcone, R., & Hreglich, S. (2005). Glass-ceramics obtained by the recycling of end-of-life cathode ray tube glasses. Waste Management, 25, 183–189. [https://doi.org/10.1016/j.wasman.2004.12.007](https://www.google.com/search?q=https://doi.org/10.1016/j.wasman.2004.12.007)
  7. ASTM International. (2017). ASTM E11-17: Standard specification for woven wire test sieve cloth and test sieves. ASTM International. [https://doi.org/10.1520/E0011-17](https://www.google.com/search?q=https://doi.org/10.1520/E0011-17)
  8. Bhola, K. (2025). Integrated approach to creating ceramic glazes and stoneware clay bodies. International Journal for Multidisciplinary Research, 7(5).
  9. Braganza, S. C. (2001). Lahar porcelain. College of Education, Pamantasan. Retrieved July 17, 2016, from [http://pcierddost.gov.ph/publication/forth/lahar/porcelain.pdf](https://www.google.com/search?q=http://pcierddost.gov.ph/publication/forth/lahar/porcelain.pdf)
  10. Caki, M., Kaya, S. Y., & Günhan, B. (2013). The use of glass wastes in stoneware glazes as alternative raw materials. Ceramics – Technical, 37, 30–38.
  11. Chajec, A. (2023). The use of granite powder waste in cementitious composites. Journal of Materials Research and Technology, 25, 4761–4783. [https://doi.org/10.1016/j.jmrt.2023.06.253](https://www.google.com/search?q=https://doi.org/10.1016/j.jmrt.2023.06.253)
  12. Chen, L., Li, S., & Lu, J. (2025). High-performance glazed glass-ceramics from granite sludge via instant glaze firing and controlled crystallization: Synergistic effects of multi-additives. Ceramics International, 51(30), 62477–62488. [https://doi.org/10.1016/j.ceramint.2025.10.383](https://www.google.com/search?q=https://doi.org/10.1016/j.ceramint.2025.10.383)
  13. Chidozie, I. F., & Thompson, C. O. (2022). Characterization and application of Nigerian clay raw resources for porcelain formulation and manufacture. Journal of Mineral Science and Materials, 3, 1036.
  14. Choudhary, R., Gupta, V., & Sharma, S. (2019). Utilization of granite dust waste in ceramics: A review. Ceramic Material Science Journal, 5(3), 89–103.
  15. Datiri, Y. C. (2012). An investigation of the suitability of Kerang and Miango volcanic ashes for the production of ceramic bodies and glazes (Unpublished doctoral thesis). Abubakar Tafawa Balewa University, Bauchi, Nigeria.
  16. Fabris, R., Masi, G., Mazzini, D. D., Sanseverino, L., & Bignozzi, M. C. (2025). Tribomechanical properties of glazes for ceramic tiles: A novel protocol for their characterization. Materials, 18(1), 60. [https://doi.org/10.3390/ma18010060](https://www.google.com/search?q=https://doi.org/10.3390/ma18010060)
  17. Galhano, C., Lamas, P., & Seixas, D. (2020). Use of industrial waste for the optimization of ceramic construction materials. KnE Engineering, 5(4), 36–48. [https://doi.org/10.18502/keg.v5i4.6793](https://www.google.com/search?q=https://doi.org/10.18502/keg.v5i4.6793)
  18. Gaimster, D. (1997). German stoneware, 1200–1900: Archaeology and cultural history. British Museum Press.
  19. Hamer, F., & Hamer, J. (2004). The potter’s dictionary of materials and techniques. A&C Black.
  20. Henderson, J., Ma, H., Cui, J., Ma, R., & Xiao, H. (2020). Isotopic investigations of Chinese ceramics. Archaeological and Anthropological Sciences, 12, 201. [https://doi.org/10.1007/s12520-020-01138-7](https://www.google.com/search?q=https://doi.org/10.1007/s12520-020-01138-7)
  21. Hossain, S. S., & Roy, P. K. (2020). Sustainable ceramics derived from solid wastes: A review. Journal of Asian Ceramic Societies, 8(4), 984–1009. [https://doi.org/10.1080/21870764.2020.1815348](https://www.google.com/search?q=https://doi.org/10.1080/21870764.2020.1815348)
  22. Hussnain, S. A., Farooq, M., Amjad, M., Riaz, F., Tahir, Z. U. R., Sultan, M., Hussain, I., Shakir, M. A., Qyyum, M. A., Han, N., & Bokhari, A. (2021). Thermal analysis and energy efficiency improvements in tunnel kiln for sustainable environment. Processes, 9(9), 1629. [https://doi.org/10.3390/pr9091629](https://www.google.com/search?q=https://doi.org/10.3390/pr9091629)
  23. Iyasara, A. C., Moses, J., Tse, T., & Azubuike, T. (2014). Exploring ceramic raw materials in Nigeria and their contribution to national development. American Journal of Engineering Research, 3(9), 127–134.
  24. Liu, C., Zhou, J., & Lu, J. (2025). Sinterability, structural evolution and pinhole elimination of high-strength self-glazed glass-ceramics sintered from granite sludge. Materials Technology Reports, 3(1), 2851. [https://doi.org/10.59400/mtr2851](https://www.google.com/search?q=https://doi.org/10.59400/mtr2851)
  25. Liu, H., Yu, L., Zhang, Y., & Mao, H. (2024). Sustainable utilization of red mud in construction and ceramic materials. In C. H. Weng (Ed.), Proceedings of the 9th International Conference on Water Resource and Environment (Vol. 468). Springer. [https://doi.org/10.1007/978-981-97-0948-9_30](https://www.google.com/search?q=https://doi.org/10.1007/978-981-97-0948-9_30)
  26. Lyons, A., & Lyons, A. (2019). Materials for architects and builders (6th ed.). Routledge. [https://doi.org/10.1201/9781351109550](https://www.google.com/search?q=https://doi.org/10.1201/9781351109550)
  27. Martín-Márquez, J., Rincón, J. M., & Romero, M. (2008). Effect of firing temperature on sintering of porcelain stoneware tiles. Ceramics International, 34(8), 1867–1873. [https://doi.org/10.1016/j.ceramint.2007.06.006](https://www.google.com/search?q=https://doi.org/10.1016/j.ceramint.2007.06.006)
  28. Mathias, H. (2013). Utilization of Dzumah red clay as flux and colorant in low-fired glazes (Master’s thesis). Abubakar Tafawa Balewa University.
  29. Mingione, E., Marconi, M., Rubino, G., & Salvi, D. (2025). Reduction of energy consumption in ceramic sanitary ware production through fluxing agents. International Journal of Advanced Manufacturing Technology, 139, 2671–2686. [https://doi.org/10.1007/s00170-025-16069-7](https://www.google.com/search?q=https://doi.org/10.1007/s00170-025-16069-7)
  30. Ngayakamo, B., Bello, A., & Onwualu, A. P. (2022). Valorization of granite waste powder as a secondary flux material for sustainable production of ceramic tiles. Cleaner Materials, 4, 100055. [https://doi.org/10.1016/j.clema.2022.100055](https://www.google.com/search?q=https://doi.org/10.1016/j.clema.2022.100055)
  31. Odewole, P. O., Kashim, I. B., & Akinbogun, T. L. (2022). Investigation into the viability of porous glass-ceramics produced from granite dust and maize cob for thermal insulation. Journal of Mechanical Engineering and Sciences, 16(2), 707–720. [https://doi.org/10.15282/jmes.16.2.2022.11.0707](https://www.google.com/search?q=https://doi.org/10.15282/jmes.16.2.2022.11.0707)
  32. Ogundare, T., Umeh, A., & Jegede, F. (2016). Characterization of granitic igneous rock for development of functional ceramic glazes. International Journal of Innovation and Scientific Research, 27(2), 289–293.
  33. Raut, S., Sahu, K., & Dhoble, S. (2018). Sustainable use of granite slurry in ceramic applications. Journal of Sustainable Materials Research, 7(4), 45–57.
  34. Rhodes, D. (1973). Clay and glazes for the potter. Chilton Book Company.
  35. Silva, R. V., de Brito, J., Lye, C. Q., & Dhir, R. K. (2017). The role of glass waste in ceramic-based products. Journal of Cleaner Production, 167, 346–364. [https://doi.org/10.1016/j.jclepro.2017.08.185](https://www.google.com/search?q=https://doi.org/10.1016/j.jclepro.2017.08.185)
  36. Singh, M., Upadhyay, S., & Prasad, P. M. (1996). Preparation of ceramic glaze tiles using red mud. Journal of Materials Science Letters, 15, 826–828.
  37. Singh, S., Nagar, R., & Agrawal, V. (2016). Properties of sustainable concrete using granite dust. Journal of Cleaner Production, 126, 74–87. [https://doi.org/10.1016/j.jclepro.2016.03.114](https://www.google.com/search?q=https://doi.org/10.1016/j.jclepro.2016.03.114)
  38. Sundari, K. N., Subari, Birawidha, D. C., Prasetia, H., Mudra, I. W., & Hendronursito, Y. (2024). High-hardness ceramic glazes based on basalt. Physicochemical Problems of Mineral Processing, 60(3), 190121.
  39. Toniolo, N., Taveri, G., Hurle, K., Roether, J., Ercole, P., Dlouhy, I., & Boccaccini, A. R. (2017). Fly-ash-based geopolymers with recycled waste. Journal of Ceramic Science and Technology, 8(3), 411–419.
  40. Umar, A. D. (2000). Studies on the qualities of Alkaleri kaolin in high-fired ceramics (Doctoral thesis). Abubakar Tafawa Balewa University.
  41. Vuković, J., Perušić, M., Stopić, S., Kostić, D., Smiljanić, S., Filipović, R., & Damjanović, V. (2024). A review of red mud utilization possibilities. Ovidius University Annals of Chemistry, 35(2), 165–173.
  42. Wood, N. (1999). Chinese glazes: Their origin, chemistry and recreation. University of Pennsylvania Press.
  43. Yin, M., Rehren, T., & Zheng, J. (2011). High-fired glazed ceramics in ancient China. Journal of Archaeological Science, 38(9), 2352–2365. [https://doi.org/10.1016/j.jas.2011.04.014](https://www.google.com/search?q=https%3A%2F%2Fdoi.org%2F10.1016%2Fj.jas.2011.04.014)
How to Cite

Mathias, H., Jomboh, K. J., & Bello, H. I. (2026). UTILIZATION OF SAHEL GRANITE DUST FROM GUDUM HAUSAWA IN BAUCHI STATE AS A GLASS FORMER IN THE FORMULATION OF STONEWARE GLAZES. Nigerian Design Review Journal of Industrial Design, 11(1), 1-22. https://doi.org/10.67203/ndr.2026.m1gvg8w3

H. Mathias, K. J. Jomboh, and H. I. Bello, "UTILIZATION OF SAHEL GRANITE DUST FROM GUDUM HAUSAWA IN BAUCHI STATE AS A GLASS FORMER IN THE FORMULATION OF STONEWARE GLAZES," Nigerian Design Review Journal of Industrial Design, vol. 11, no. 1, pp. 1-22, June 2026. doi: 10.67203/ndr.2026.m1gvg8w3

Share this article:
Facebook X / Twitter LinkedIn
Download PDF View Full Text (PDF) Back to Articles